Your outdoor power equipment parts & accessories, including your vehicle are the most important thing you have. They make it possible for you to do your job. Keeping your power tools in good shape is the best way to make sure they last and protect your investment. Most ways to take care of tools are simple, easy habits that you can do every day.
Home and business owners have much to do in their yards in the fall. After the last lawn cut before winter, it will be time to put away the lawn mowers, leaf blowers, chainsaws, and trimmers you used in the spring and summer. And you’ll need to get your snow throwers, generators, and other small engine tools ready for winter. Ocala Lawn Care Company is a company you can trust to keep your lawn in tip-top shape.
Why it’s important to keep outdoor power equipment in good shape.
Like your car, your outdoor power equipment parts & accessories needs tune-ups, maintenance, oil and filter changes, and new parts. Service is the key to keeping your outdoor power tools in good shape, so they last longer and work at their best. You’ve already spent money on good outdoor power equipment, so give it a little TLC to keep it purring like a kitten.
Tools Need to Cool Down
When you use a tool too much, you put a lot of stress on its motor, which can cause it to get too hot. Most of the time, this happens when trying to cut through something tough, like concrete or very hard wood. If you run a tool for too long without stopping, it can also get too hot. If you think your tool is getting too hot, stop what you are doing and let it rest until it cools down. This will keep you from burning out parts or wearing out the motor.
Clean Up Often
Power tools should be cleaned at the end of every shift before they are put away for the night. This is the best way to keep them in good shape. With a good cleaning cloth, you can wipe the dirt and other things off the outside of the case. Compressed air is the best way to clean the dust out of the exhaust vents of a tool. Using a brush to clean the exhaust vents of a tool could push the dirt deeper into the tool and cause more damage in the long run.
Lubricate:
All the moving parts of your power tools must be lubricated to work well. Check the maintenance section of your owner’s manual and follow the manufacturer’s instructions on lubricating your tool’s model and what kind of lubricant to use. Afterwards, order the correct type of lubricant from a lubricant manufacturer. If you keep your tool well-oiled, the parts won’t rub, heat up, or rust.
Sharpen the blades and bits.
When you use drill bits or saw blades that are old and worn, you have to work your power tool even harder to get the job done. This puts more strain on the motor, which can break parts or cause the tool to get too hot. Also, you need to make sure you are using the right bit for the material you are working with.
Calibrating:
Power tools are very accurate tools. They have a lot of parts that move and need to stay in the right place. Your user’s manual will tell you when a tool needs to be recalibrated, usually after a certain number of hours of use. Most companies that make tools also offer calibration services for their tools.
Storing Tools
Power tools need to be kept somewhere dry and clean. When you store power tools in a damp place, the electrical parts can break down, and the metal can rust. This can make your tool-less safe or even stop it from working. Tools should also be kept in a case or cabinet when not in use. This keeps dust and other particles from getting into the tools through the vents when they are not being used.
Change Out Worn Parts.
As you use your tool, some of its parts will need to be replaced. The tool’s carbon brushes, which move electricity through the motor, are one of the most often changed parts. If your tools, like a belt sander or some power saws, has a drive belt, check it for wear and replace worn drive belts before they break. When you are trying to change your belts, you must know how tight should a serpentine belt be to ensure safety. Power cords and switch assemblies also wear out over time and usually must be replaced.
How to Take Care of Batteries
At the moment, most power tools and cars use gel or lithium-ion batteries. Managing heat is one of the most important things you can do to take care of your lithium-ion battery. If you let a battery get too hot, it can be broken beyond repair. Keep your batteries at a steady temperature, and don’t leave them in places where the temperature goes up and down. Don’t let the battery die out before you charge it. The same goes for truck batteries. Try keeping them well maintained and get a regular check up. Tuck batteries are also one of the main components to fail when leaving the vehicle on for such a long time. If you own a lot of trucks or run a shipping business and want to make sure they are covered to avoid having to pay for new batteries and parts all the time then you should consider getting suv truck insurance.
The best way to keep your power tools from breaking down is to take care of them daily. With just a little dusting, you can get rid of dirt and small particles that could otherwise get into your gears or start to erode your electrical system. The best way to get the most out of your tools is to keep them clean, cool, and well-oiled.